PL-S UV-C Germicidal Lamps
- UV-C Output Role: Emission supports a managed process whose operating performance is established at finished-system level.
- Purpose-Built Equipment Fit: This component suits hosts engineered around a dedicated lamp interface rather than general lighting sockets.
- Planned Lamp Replacement: A removable component supports controlled renewal at the maintenance interval set by the equipment plan.
| Lamp form | PL-S twin-tube return form, Φ12 mm |
|---|---|
| Rated power | 5–13 W range |
| Base options | G23 or GX23 2-pin; 2G7 4-pin |
| Primary wavelength | 253.7 nm UV-C |
| Ozone choice | Non-ozone or ozone-generating variant; 185 nm applies to the ozone option |
|---|---|
| Supply boundary | Lamp only; holder, ballast, enclosure and safeguards are separate |
| Rated lifetime / warranty | 8,000–10,000 h / 1 year |
Technical Specifications
Model Specifications
| Model | Dimensions | Connection Options | Rated Power | Spectrum | Listed UV-C Intensity (μW/cm²) |
|---|---|---|---|---|---|
| XGYPLS-UVC-5W | Φ12 × 85 mm | G23 | 5 W | UVC | 13 |
| XGYPLS-UVC-5W | Φ12 × 85 mm | 2G7 | 5 W | UVC | 13 |
| XGYPLS-UVC-7W | Φ12 × 115 mm | G23 | 7 W | UVC | 18 |
| XGYPLS-UVC-7W | Φ12 × 115 mm | 2G7 | 7 W | UVC | 18 |
| XGYPLS-UVC-9W | Φ12 × 145 mm | G23 | 9 W | UVC | 28 |
| XGYPLS-UVC-9W | Φ12 × 145 mm | 2G7 | 9 W | UVC | 28 |
| XGYPLS-UVC-11W | Φ12 × 215 mm | G23 | 11 W | UVC | 40 |
| XGYPLS-UVC-11W | Φ12 × 215 mm | 2G7 | 11 W | UVC | 40 |
| XGYPLS-UVC-13W | Φ12 × 155 mm | GX23 | 13 W | UVC | 50 |
| XGYPLS-UVC-13W | Φ12 × 155 mm | 2G7 | 13 W | UVC | 50 |
Connection options are distinct physical variants; match the holder and operating circuit. Measurement distance, geometry and test conditions for the UV-C values are not provided, so the values are not for cross-model performance comparison or finished-system design.
Product Description
Product Details
Product Construction
The sales item is a PL-S UV-C germicidal lamp. The host assembly provides the matching holder, operating circuit, enclosure and safeguards.
Selection & Installation Notes
Use the complete sales model, then confirm the lamp interface, operating circuit, physical clearance and validated exposure design against the equipment specification. Direct UV-C exposure can injure eyes and skin, so prevent access to the operating source and follow the equipment manufacturer’s instructions and applicable safety requirements. Compare related products in our UV-C germicidal lamp range.
Recommended Application
Applications
- Enclosed Air Treatment: PL-S UV-C lamp components serve in closed air-treatment equipment designed and validated for the selected source.
- Enclosed Water Treatment: The lamp functions inside closed water-treatment equipment with a matched interface and operating circuit.
- Process Treatment Chambers: Replaceable UV-C sources support shielded process equipment with controlled service access.
- OEM UV-C Equipment: PL-S lamps integrate into purpose-built equipment with validated exposure control and protective safeguards.
in touch
- No.5 Fenghuang Road Qianjiang Industrial Area Dingqiao Town Haining Zhejiang 314413 China
- +86-18358315743
- R.KOO@NEW-LIGHTS.COM
Frequently Asked Questions?
Find clear answers to common questions about product specifications, model selection, applications, and quotation requirements. For project-specific needs, send us your target market, required quantity, and key specifications.
No. Use them only inside enclosed or otherwise engineered equipment that prevents unintended UV-C exposure.
Match the complete sales model to the equipment interface, operating circuit, available clearance and approved maintenance specification.
No. Validate performance using the complete equipment design, exposure conditions, operating cycle and maintenance plan.
Avoid direct skin exposure and never look directly at an operating UV-C source. Follow the finished equipment’s safety instructions and access controls.
Use shielding, interlocks or equivalent access controls appropriate to the validated equipment design, together with warning and maintenance procedures.
Confirm the certificate document, covered model, finished-equipment scope and destination-market requirements before relying on any certification claim.













